Monthly Archives: October 2019

Welcome to my stop on Tutorial Week with Finish-a-Long. I'm sharing my process for using scraps to create pumpkin blocks.

 

Grab your orange (or yellow or white or whatever color you want your pumpkins to be) scraps. Depending on the size of your scraps and the size of your desired pumpkins you can use your scraps as is (which I've done with my single fabric pumpkins) or you can piece together your smaller scraps to form a scrappy slab (as shown in the large pumpkin) before constructing your pumpkin. You'll also want fabric for a stem and a contrasting background fabric.

Pumpkins come in a variety of sizes and shapes. Cut the largest rectangle (can be square or not) from your orange fabric.

Background is attached to the pumpkin by adding snowball corners to each corner. To determine the size of these background triangles I recommend cutting squares that are 1/5 to 1/3 the length of your pumpkin's shortest side. Make these calculations using finished dimensions. For example, for my 5" x 6" orange rectangle, subtract 1/2" in each dimension for finished size: 4 1/2" x 5 1/2". Next, calculate 1/3, 1/4, or 1/5 of the shortest length, in this case 4 1/2".

1/3 of 4 1/2" (4.5 divided by 3) is 1.5" or 1 1/2"

1/4 of 4 1/2" (4.5 divided by 4) is 1.125" or 1 1/8"

1/5 of 4 1/2" (4.5 divided by 5) is 0.9"

There isn't anything super precise about the choice you make here. The range of these calculations in this example is roughly 1" to 1 1/2". You can round to the nearest 1/4" for friendlier measurements. Then add 1/2" to your choice to get the dimensions of the unfinished square. Cut 4 squares in these dimensions. I used 1" finished (since it is between 0.9 and 1.125), so I cut four 1 1/2" squares for my corners on this pumpkin.

Use your preferred marking tool to mark the diagonal on the back of each of your four background squares, align pumpkin and background fabrics right sides together and sew on the marked diagonal line.

Trim 1/4" from stitching line and press open. (Tip: if you are working with larger pieces, you can sew a second line of stitching 1/2" from the first so that the remnant you trim off is a finished HST as shown in this previous tutorial.)

The simplest stem option is to include a rectangle of brown fabric on the top edge of the pumpkin. (You can experiment with different shaped stems and even add leaves!) For my stems I cut a brown rectangle the same width as the background square above and 1/2" taller. In this case I cut a 1 1/2" x 2" brown rectangle and two 2" strips of background each approximately half the width of the pumpkin. Piece the strip with two background pieces and one stem piece, trim to same width as pumpkin, and attach. You can center the stem on the pumpkin by folding each part to find the centers and align to attach the stem. I just eyeballed it since in nature the stems aren't necessarily perfectly centered.

Add background fabric to bring up to your desired block or mini quilt size.

Here's a glimpse of all the pieces (except for background strips).

 

Bet ya can't make just one!

This mini pumpkin is made from a 2" x 2 1/2" scrap of orange fabric, with 1 3/8" corner squares. The stem is 1 3/8" x 1 7/8".

 

This scrappy version is made from a 6 3/4" x 7 3/4" scrap of orange fabric, with 1 3/4" corner squares. The stem is 1 3/4" x 2 1/4".

Happy Sewing!

 

We have reached the end of Quarter 3 of the 2019 Finish-A-Long!! Of course, this means it is now time to link up those finishes from the list you linked up in July. We hope that you have been able to complete a lot of the UFOs from your list and if you haven't, we'll do it all over
again for Quarter 4...

The 2019 FAL is hosted by a great community of bloggers. This year our hosts are:

Each finish you link up will be in the draw for great prizes, so let's give a huge thank you to our fantastic sponsors:

 

The 2019 Quarter 3 link for your finishes is now open below on my blog and on each of the hosting blogs - you only need to link on one blog for your finish to appear on all host blogs.

Link-up "Rules"

Add one link for each finish.  If you want to link a round up post of all your finishes, use that link to enter one of your finishes and then link the rest of your finishes separately.  Please, only one link per finish, as your link is an entry into the randomly drawn prize draws.

Please ensure that the photo (Instagram or Flickr) or blog post you link up contains a link or reference back to your original list so that we can verify your entry (make sure it is from the right quarter, too). On Instagram the best way to do that is to tag your photos with #2019FALQ3yourname (where yourname is unique to you), this makes it easier for us to match your finishes with your list, which also should have this tag.

Please become part of the FAL community.  Check out the links of others and leave a comment. We all need encouragement so let's applaud each other. The 2019 FAL Facebook page is HERE and you can follow us on Instagram @finishalong.

Our hosts will also link up their finishes to share in the community but they are not eligible for any of the prizes.

The Q3 Finishes link will stay open from now thru 11 pm, EST, Wednesday, October 9, 2019 - as we are global, you might want to check your time zone to determine your last possible time to link. You can also see how much time is left below the linked up images on the right.  It is best to link up your finishes early and if you have a last minute one, add that one later so you don't miss out.  The prizes will be awarded as soon as we can verify all the entries and do the drawings.  We will post the winners on each host's blog.

Lastly, don't forget to start making your Q4 list as the next LIST link opens on Thursday, October 10, 2019.

2019 Q3 Finishes Link Up: