Tag Archives: Aurifil Artisan

8 Comments

The products featured in this post were given to me by Island Batik, Hobbs, and Aurifil.

This month we were asked to create a quilt to adorn a table for the holidays. We were required to use appliqué, though our project could be any size. My Fall table topper finished at approximately 20" square. I used Hobbs Thermore batting. It's a super low loft 100% Polyester batting, which should keep my table topper nice and flat.

I chose pumpkin orange batiks to create a scrappy slab for the pumpkin. This included Cheddar as well as a couple from the Island Batik Clockworks collection. (The background and stem are from Clockworks, too!)

I used the snowball technique for adding background triangles to the corners of my rectangular scrappy slab and pieced in a brown stem. My technique is basically the same as my pumpkin tutorial from earlier this month, with a slightly different stem. To fulfill the requirement of having appliqué in my project I chose Bubbles in Chartreuse to make a pumpkin leaf. A quick online search helped me with the general shape of a pumpkin leaf. I used Heat and Bond Lite to raw-edge fusible appliqué my leaf onto the otherwise completed quilt top. My top stitching on the leaf was done as quilting. I chose to mimic the look of the veins of the leaf.

I was lucky enough to come home from Quilt Market with the Island Batik Solstice collection of 40wt Aurifil thread. It had the perfect options for me to consider using for this project. The first image below shows Brass (#2975), Light Cinnamon (#2335) , and Dark Brown (#5024), and beneath that a peak inside the whole box.

 

My selections strike me as an odd mix of colors for my quilting. I ended up with four colors in three different weights. It's amazing how on their own I never would have put these colors together, but when considering what blends best in each section of the quilt, these four were the right choices!

Light Leaf Green (#1147) was the perfect color for the leaf. I had it in various weights in my thread collections and opted to use the 28wt to outline the leaf and stitch the vein pattern. Dark Brown (#5024) was a great choice for my echo quilting inside the stem.

I opted for Brass (#2975) for quilting the pumpkin. I started by echoing inside the border of the pumpkin, then filled it with spirals (my favorite free motion motif!). Finally, I chose Pale Green (#2880) from my stash for quilting the background. First, an echo line around the pumpkin, then zig zag meander to fill in the entire background. I'm not sure if I've shared about it on the blog, but I'm loving my new-ish open toe free motion foot. Total game changer!

Have I mentioned how I love the gears on the background fabric!?

 

I was excited to enjoy this quilt on Halloween and look forward to its continued use throughout the rest of the Fall, including Thanksgiving.

 

Check out what the other Ambassadors are topping their tables with this month!

I'm linking up to Needle and Thread Thursday and TGIFF.

Happy Friday! Today Fat Quarter Shop launched their Ocean Waves Quilt Block Pattern. I was one of eight makers to stitch together samples of the block.

 

I chose two fabrics from my scrap bin and got to work!

Using their Triangles on a Roll to stitch up my perfect 2 1/2" finished HSTs. This method was both speedy and effective. You pin your fabrics to the paper, stitch through all three layers on the dotted lines, cut on the solid lines, and remove the paper. I reduced my stitch length as I do with foundation paper piecing, and the newsprint paper was easy to tear away.

 

Fat Quarter Shop is offering a free block tutorial for these 10" finished blocks as well as a complete pattern in four sizes. There's even a quilt kit available!

Happy stitching! See what others are making at #oceanwavesquilt, #fqsquiltalong, and #fatquartershop on social media.

Fat Quarter Shop Quilting Fabric and Supplies

This post contains affiliate links. I may make a small commission if you make a purchase after following one of these links, but the price you pay is not affected and your shopping experience is unchanged.

4 Comments

The thread featured in this post was given to me by Aurifil.

The September Aurifil Artisan challenge is cross stitch and embroidery featuring 12wt or Aurifloss. I'd been feeling the pull toward embroidery and knew this was the perfect opportunity to finally get started on my Hanauma Bay embroidery hoop. I learned cross stitch when I was 8 years old, but I haven't done any in decades. My daughter has learned some embroidery stitches at school and recently I've been helping her to expand her repertoire of stitches.

In March 2018 on a family trip to Oahu I taught my kids how to snorkel. This is something that I really loved as a kid (and still do) and it was so nice to share my passion with them. I grew up vacationing to Kauai and had never snorkeled on Oahu. Our last day on the island we did the long drive from the north shore down to Hanauma Bay Nature Preserve. The parking is restricted so you either have to arrive early, or show up after lunch. As people start leaving the beach they open parking to let in a limited number of cars. The parking lot was closed when we arrived. That stretch of road is highway with one lane in each direction. We drove back and forth past the parking entrance for about 20 minutes, turning around in two nearly lookout points. We were about to admit defeat when finally the parking lot was open and we were able to enter.

What a view! And the beach was so lovely with super calm water from the protected bay. We spent a lovely afternoon snorkeling and then the kids played in the water while I read my book on the beach.

 

Fast forward, I've been following Rosanna Diggs, an embroidery artist from Alameda, California, on instagram for a while when she made her Hanauma Bay embroidery hoop. Her work is beautiful and I really enjoyed the nostalgic memories from our trip a year before. I really considered purchasing this hoop and had a little regret when it sold. A couple months later she put out a PDF pattern and two finished mini hoops for sale. I immediately knew that I wanted to purchase one of the hoops. She had made one with a cloud and one without a cloud and I elicited the help of my kids for which one to purchase. I mentioned that there was also a pattern to make your own and my daughter immediately indicated that the pattern was the right choice and that she was interested in working with me on the project. Rosanna sells a Hanauma Bay full kit now as well.

I used a DMC to Aurifloss conversion chart to select my Aurifloss colors. I love these wooden spools and how easy it is to keep the floss tidy.

My daughter helped with most parts of the project (though I did the entire mountain and cloud while she was at school or asleep). Either we sat together and passed the project back and forth to take turns, or if she happened across it left out on the couch she would add a few stitches. She's already talking about what to stitch next. I think she might enjoy picking a piece of printed fabric and using embroidery stitches to embellish it.

The project had a nice variety of different stitches (and oh so much satin stitch!). There were two different kinds of knots, couching, and the shrubbery in the foreground is made of little loops. Rosanna included detail shots and directions for each type of stitch in the project as well as a photo walk-through with directions and tips. (We improvised a little on the shrubbery. :-)) I especially love the texture of the cloud (fluffy 6-strand french knots) and the shrubbery.

We had a little disagreement about where this should hang in the house, but we've settled on it living in my daughter's ocean themed room. I'll enjoy visiting it. ;-)

 

The water was such lovely colors and I enjoyed the beautiful view!

I've linked up to the Q3 Finish Along Finishes post. Check out my whole Q3 list of projects.